Will Simple be compatible with Square
Translation of "Square Adapter" in German
Documents Business Solutions Conjugation Synonyms Spell check Help and About Us
These examples may contain rude words based on your search result.
These examples may contain slang words based on your search result.
The Circle to Square adapter can be modeled by creating a parallel blended wall.
The transition piece from a circular to a square Opening can be modeled using a parallel composite flap.
Square adapters in other sizes are available as accessories.
The following steps outline how to create a Parallel Blend Circle to Square Sheetmetal adapter.
The following steps describe how to create a composite element between a circular and a square Cut can be generated.
The basic products of this system are the "Rip-Clutch Square with adapter 5/16 "-24" (picture on the left) and the "Rip-Clutch Round with adapter 5/16 "-24 IN".
The basic building blocks of this line are the "rib coupling" Rectangular With adapter 5/16 "-24" (shown on the left) and the "ribbed coupling round with adapter 5/16 "-24 IN".
There are three different frame types, four table-top shapes (rectangular, hexagonal, round and square) and adapters for different table-top accessories ("Kitos E Plus") and a slide-flap function covering the cable duct ("Kitos E Advanced").
There are three different frame types, tabletop shapes (rectangular, hexagonal, round, square) as adapter for various table accessories ("Kitos E Plus") as well as a slide-and-fold technology for access to the cable compartment ("Kitos E Advanced").
This command lists each adapter by index number in square brackets followed by the name of the adapter as it is registered.
With this command the adapter sorted by their index number in angular Brackets followed by the name under which are registered appear.
For this purpose, the adapter rail (25) has a square profile, open at one corner.
Including QuickIN socket adapter to hold sockets with 1/2 in square holder.
Device according to Claim 8, characterized in that the adapter (18) has a square outer cross section and the catches (22) are defined by slots in the walls of the adapter (18).
Device according to claim 8, characterized in that the adapter (18) one square Has outer cross-section and the latches (22) through slots in the walls of the Adapters (18) are limited.
The tilter according to claim 1, wherein said adapter plate (90) includes four holes forming corners of a square (96) having sides of approximately 75 millimeters.
The tilting device of claim 1, wherein the Adapter plate (90) contains four holes that form the corners of a Square (96) with sides of about 75 mm.
The adapter of claim 15, wherein the locking mechanism (108,109) is adapted to disengage at a cartridge pressure greater than 200 lbs. by square inch gauge (1.4 x 10 6 N / m 2).
adapter 16. The latch mechanism (108, 109) of claim 15, wherein the locking mechanism (108, 109) is adapted to lock at a cartridge pressure greater than 200 lbs. Per Square inch To unlock overpressure.
The adapter sleeve has an external curvature (17) along at least one and preferably two adjoining long sides (15) to produce force-locking connection with the square opening.
The invention relates to a Adapter sleeve for adapting a square pin to a square opening of a lock nut or a door or window handle.
Set of adapters according to any one of the preceding claims, characterized in that the second holding region (17,117, 217) is configured as a simple geometric basic shape, preferably with a cylinder region, in particular with a square cross-section.
Set of Adapters according to one of the preceding claims, characterized in that the second receiving area (17, 117, 217) is designed as a simple geometric basic shape, preferably with a cylinder area, in particular with square Cross-section.
System according to any one of the preceding claims, characterized in that a resiliently flexible seal, particularly an O-ring (11), is arranged between the mounting adapter (1) and the outer side of the square pipe (2).
System according to one of the preceding claims, characterized in that an elastically flexible seal, in particular an O-ring (11), between the Bracket adapter (1) and the outside of the Square tube (2) is arranged.
The chamber is made of steel galvanized sheet, it can be delivered in square or round versions. The round anemostats can also be connected directly without chambers via adapters.
With these aluminum profiles, the toughness of the entire product could be significantly increased, which in turn reduces the deflection of the leaves and thus the tendency of the rain protection blinds to resonate with larger ones Wind speeds have been significantly reduced.
NOTE: the module with the specific "world module adapter"is compatible with electric switch brackets and plates suitable for installing in both rectangular in-wall 503 and round or square boxes.
NOTES The module with its "World module adapter"is compatible with brackets and plaques for electrical switches that are placed on a rectangular box 503 as well as on a round or more square Can be installed.
The adapter according to any of claims 1 to 8, characterized in that the cross-section of the opening of the outlet of the adapter or the piece connected is either cylindrical, rectangular, square, triangular or oval.
adapter according to any one of claims 1 to 8, characterized in that the cross section of the opening of the outlet of the Adapters or the attached piece either cylindrical, rectangular, square, triangular or oval.
3 0501352 01 0 Find dealer clamping adapter for angled head With 1/4 square head, suitable for closed Lübbering tongue tool adapter A, only in conjunction with Premium angled head.
3 0501 352 01 0 Buy online Specialist dealers on site Clamp adapter angle head ASW 9/10/14 with 1/4 in external square suitable for closed Lübbering tongue tools Adapter-A, only in connection with angled head Premium.
Air enters parallel square- or rectangular-section channels (21) at the first end and is collected by an adapter manifold (3) with a connection (31) to a ventilation fan (7) at the second end.
The wall (2) is designed as a hollow profile and has a adapter (3) on, in the air from hollow shafts (21) of the hollow profile of the wall (2) is performed.
Content may not be appropriate. Examples are only used to help you translate the word or phrase you are looking for in different contexts. They are not selected or reviewed by us and may contain inappropriate language or ideas; please report examples that you would like to edit or not display. Tactical or colloquial translations are generally marked in red or orange.No results were found for this meaning.
Results: 24. Exact: 1. Elapsed time: 169 ms.
Word index: 1-300, 301-600, 601-900
Term index: 1-400, 401-800, 801-1200
Phrase index: 1-400, 401-800, 801-1200
© 2013-2020 Reverso Technologies Inc. All rights reserved.
- What are Toblerone pralines made of
- How do I get approved for Media Net
- How do guarantee companies make money
- What does BIS stand for in standards
- How do some bicycle power meters work
- Women find Keannu Reeves attractive
- Why hate your parents
- Half a ticket includes a sleeper
- Can you be spiritually awakened by loving you?
- How did Yammer get the initial traction
- What is the greatest challenge facing Judaism
- Why ADHD ADHD drugs reduce appetite
- How was your time at Disney World
- Which countries are for Israel
- Is distrokid reliable
- How is Mildred Hubble a witch
- Is it difficult to live in Dallas?
- How do you sing like Miley Cyrus
- What kind of animal rapes other species
- What are the Most Surprising Search Engines
- What is michigan basketball
- Where can I get Guru Randhawa songs
- Brazil has a desert
- People in China like cupcakes